The peeling book glue cutter is used for cutting edge and peeling of waste books.

The working principle is:

Put the book with the glue side down into the groove of the machine, the machine rotates and uses the cam in the machine to tighten the book, then cut off the glue strip on the book, rotate to drop the book to the outlet, and then rotate the two book covers Dropped into the cover of the book. The machine can cut book glue and sort book cover in a single operation. It can reduce the labor intensity of book cutting, improve production efficiency, and increase customers' income. The machine is easy to maintain and has peace of mind, and can process one ton of books in one hour. 1 person can operate, save labor, low cost, and the thickness of the cutting strip can be adjusted. The disc type is adopted, the 6 grooves can be processed and cut off sequentially, and the book glue strips are automatically separated, which is convenient and simple. It can also adjust the working speed of the machine by frequency conversion according to the working speed of different personnel, which can be used with peace of mind.

Precautions for use:

1 Turn on the main power and turn on the oil pump.

2. After checking the equipment point to be normal, correct rubber cutting operation.

3 The tool and speed have been adjusted, and the operator is not allowed to adjust it at will.

4 To adjust the product during the cutting process, you need to manually adjust and press the stop button.

5 Cut off after get off work, please press the stop button to reset.

6 Press the pump stop button to stop working.

7Turn off the main power.

8 Cleaning around equipment and grooving.